| 7021A5TRDUDLP3 NSK Super Precision Bearings | Coefficient of friction µ max.:0.1; Tolerance housing:H7; Permissible sliding velocity v max.:5 m/s; Specific dynamic load factor K:10 N/mm²; Coefficient of friction µ min.:0.05; Specific static load factor K0:20 N/mm²; D:32 mm; Permissible sliding velocity v min.:0.25 m/s; Mass bushing:0.11 kg; B:30 mm; Tolerance shaft:h8; d:16 mm; |
| 7928A5TRSULP3 NSK Super Precision Bearings | Availability:In Stock; Weight:53.00 KGS; Oil Limiting Speed (r/min):950; Cage Type:Steel; d:220mm; D:370mm; Seals or Shields:Open Type; Dynamic Load Rating (kN):1570; Clearance:Standard; Grease Limiting Speed (r/min):710; Static Load Rating (kN):2710; B:120mm; SKU:23144cke4-nsk; |
| 7926A5TYNSULP4 NSK Super Precision Bearings | Clearance:Standard; Availability:In Stock; D:125mm; SKU:3mmv9116hxcrdul-timk; d:80mm; Seals or Shields:Open Type; Weight:0.88 KGS; Cage Type:Plastic; Speed Rating (r/min):11900; Dynamic Load Rating (kN):26.2; Static Load Rating (kN):34.4; B:22mm; |
| 7026CTRSULP3 NSK Super Precision Bearings | Da:190 mm; h:47.625 mm; A2:174.625 mm; P150°:44.5 kN; J1:57.15 mm; Max. speed for PosiTrac Plus seal:1800 r/min; S:4.763 mm; PosiTrac Plus contact element:2 x B10724-188; Housing:SAF 618; Cap bolt:2 x 3/4-10 UNC; P60°:128 kN; Ca:73.787 mm; P90°:77 kN; Initial grease fill:232.47 g; Pa:17.3 kN; End plug (suffix Y):EPR 11; Mass pillow block:44 kg; R2:28.575 mm; P180°:54.3 kN; R1:73.025 mm; |
| 7924CTRSUMP3 NSK Super Precision Bearings | Limiting speed:4800 r/min; Fatigue load limit Pu:15.3 kN; Ew:107 mm; Mass needle roller and cage assembly:0.12 kg; U:21 mm; Basic static load rating C0:127 kN; Fw:100 mm; Reference speed:4000 r/min; Basic dynamic load rating C:45.7 kN; |
| 7221CTRSULP3 NSK Super Precision Bearings | r1,2 min.:5 mm; Mass bearing (including seat washer where applicable):310 kg; Da max.:1445 mm; Reference speed:240 r/min; Basic dynamic load rating C:1330 kN; H:130 mm; d:1380 mm; Basic static load rating C0:16300 kN; Minimum load factor A:1400; d1 ≈:1535 mm; ra max.:4 mm; D:1535 mm; Limiting speed:340 r/min; D1 ≈:1385 mm; da min.:1475 mm; Fatigue load limit Pu:156 kN; |
| 7930CTRSUMP3 NSK Super Precision Bearings | J:450 mm; J1:110 mm; P90°:1150 kN; Eye bolt, size:2 x M 16; N1:28 mm; Q180°:900 kN; N4 max.:20 mm; P180°:950 kN; P150°:760 kN; Cap bolt, size:M 24x140; A2:235 mm; J6:490 mm; P120°:850 kN; P55°:2400 kN; H2:75 mm; Cap bolt, rec. tightening torque:350 N·m; Mass housing:77.5 kg; Q120°:1800 kN; Appropriate attachment bolt, size G:24 mm; Locating ring:2 x FRB 10/300; |
| 7919A5TRDUMP3 NSK Super Precision Bearings | Fillet Radius ra:0.64 mm; B:12.00 mm; Accessories:Without Accessories; d:17.000 mm; Oil Speed Rating Open/Shielded n2:17000 rpm; D:40.0000 mm; Basic Dynamic Radial Load Rating C:8970 N; Grease Speed Rating Open/Shielded n1:14000 rpm; Basic Static Radial Load Rating Co:6000 N; |
| 7920CTRSULP3 NSK Super Precision Bearings | Basic Interchange BCA:8508; Basic Interchange FAF:-; Accessories:8000 One Seal; Basic Radial Load Rating-Static SCO:18000 N; Width - Inner Ring B1:24.00 mm; Fillet Radius ra:1.00 mm; Basic Interchange NDH:8508; d:40.000 mm; Width - Outer Ring B0:21.0 mm; Old MRC Bearing Number:208FS; Basic Radial Load Rating-Dynamic DC:29100 N; Speed Rating-Single and Double Sealed Grease SDG:5600 rpm; D:80.0000 mm; |
| 7222A5TRSULP3 NSK Super Precision Bearings | d:240mm; B:160mm; Reference Speed Rating (r/min):650; SKU:24148embw33w45ac4-ti; Weight:80.50 KGS; Availability:In Stock; Limiting Speed Rating (r/min):610; Cage Type:Brass; D:400mm; Seals or Shields:Open Type; Dynamic Load Rating (kN):2690; Clearance:C4; Static Load Rating (kN):4050; |